|
DIL module with XC3S200 Spartan-3 FPGA
The FPGA module can replace a PAL/GAL device and fits to a 20/24-pin
DIL socket. The small-sized GOP-XC3S200 features an Xilinx 200k gates
Spartan-3 FPGA, beside a SRAM, SPI-Flash, oscillator, configuration
Flash, LEDs and push-buttons.
Features
- Powerful replacement for PAL/GAL devices
- Direct use in 20/24-pin DIL socket
- Inputs are 5Volt-tolerant and outputs are optionally 5V CMOS compliant
- Large user memory: 512kByte SRAM, 8Mbit SPI Flash
- On-board quartz oscillator
- Easy diagnosis via 9-pin header (attach oscilloscope or logic analyzer)
- 100% compatible with Xilinx ISE software
Specification
- Xilinx Spartan-3 XC3S200-4VQG100C
- Direct insertion into PAL/GAL 24- or 20-pin DIL socket
- Std. Xilinx JTAG connector 2 mm pitch, 14-pin
- On-board SRAM 4Mbit 512kx8, 55ns access time
- On-board serial (SPI) 4Flash 8Mbit
- Quartz oscillator 49.152 MHz w. enable
- Two status LEDs, 8 user LEDs, 2 push-buttons, 7 config jumper
- 9-pin expansion header (e.g. for I/O)
- Three voltage regulators, SMPS for FPGA core supply
- Polyfuse inverse-polarity protection
- Compatible with Xilinx Impact software (WebPACK)
- supply range: 3.5 to 5.5 volts
- Height: max. 8/12 mm (top/bot of PCB), total height: 20mm max.
- Dimensions: 47 x 23,5 mm, 1,85 x 0,93 in)
- Weight: 12g
Package Contents
- GOP-XC3S200 module
- 24-pin DIL socket
- 20-pin DIL socket
- 2mm jumper; 9-pin header, 2.54mm pitch
Available for Download
- VHDL and UCF templates, User's manual (English)
|
