DFC
Is a czech company specialised in design and development of data acquisition, industrial control and automation electronics as well as complete custom embedded systems. More about company

Products

E-mail

EUS FS - Alice II - Embeddable Single Board Computer

 

EUS FS is an "open" system board designed for industrial control and data acquisition applications. It is equipped with a 32-bit CPU working @ 200MHz (Etrax FS), Xilinx's gate array (Spartan 3E) and support electronics. A BSP package contains Linux operating system version 2.6, driver for communication with FPGA and peripheral devices. Example FPGA cores are available in source form, along with full board documentation -- schematics, layout.

The system is shipped with toolchains for ETRAX and MSP processors, FPGA design and synthesis tools are available from Xilinx free of charge.

 

EUS_II_topa EUSIIa_bottom

 

Product Brief

 

pdf EUS_FSPB rev 1.0

 

Feature List

  • Board dimensions 85 x 55 mm (3.35 x 2.175" )
  • 200MHz, 32bit Etrax FS processor
  • Up to 256MB SDRAM
  • 8 - 64 MB Flash
  • FPGA Spartan 3E - XC3S500-1600E connected directly on the CPU bus
  • Up to 64MB dedicated independent DDR SDRAM
  • Temperature, voltage and current consumption sensors implemented in MSP430 microcontroller
  • Unique board serial number
  • 10/100Mb Ethernet port
  • 1 x USB port
  • 1 x RS232 port (could be extended up to 4 ports)
  • JTAG interface for FPGA (Parallel Cable IV connector)
  • 91 separate input/output signals from FPGA
  • IO processor, peripheral or 72 general IOs from ETRAX processor
  • Single power supply voltage: 5V @ 700mA (depends on configuration and USB device consumption)
  • Boot over Ethernet
  • Opensource bootloader
  • FPGA initialization and communication tools
  • OS Linux 2.6, ftp, web server, telnet
  • All source code licensed under GPL or OHGPL
  • Royalty free application development software

Three basic configurations:

  • Full system: Etrax FS + FPGA
  • Only Etrax processor
  • Only FPGA with Microblaze support
EUSFS_BD top_tn bottom_tn

Data Sheets

File

Size

Description

pdf Recommended PCB layout for Base-Boards

31.19 Kb

Recommended PCB Base-Boards layout

pdf EUS_FS 1.0-Schematic

675.17 Kb

EUS FS Schematics, rev. 1.0

pdf EUS_FS 1.1-Schematic

626.97 Kb

EUS FS Schematics, rev. 1.1 New!

pdf EUS-FS-1.0-PCB

225.18 Kb

PCB overview and board dimensions

pdf EUS_FSPB

437.57 Kb

Product Brief

 

 

Board Support Package

Link

Link Description

Installation manual

Installation Manual

BSP Linux

BSP Packages for Linux

BSP Windows BSP Packages for Windows (VMWare Image)

Evaluation Kit - Starter Board New!

 

st_topex st_top st_bot

 

 

Feature List

  • Board dimensions 160 x 100 mm (6.3 x 3.94") - Eurocard compatible
  • Evaluation Kit for EUS-FS boards
  • 2 x IO connector 96 pin, DIN41612 Class 3 compatible, IO signals +5V compatible and protected
  • 1 x 10/100Mb Ethernet connector
  • 2 x RS232 Serial connectors
  • 2 x JTAG interface for FPGA and ETRAX FS (Paralel Cable IV connector)
  • 1 x JTAG interface for MCU MSP430
  • 1 x VGA analog video connector
  • 1 x USB host connector and 1 x USB peripheral connector
  • 1F high capacitance for RTC back-up
  • 8kB FRAM I2C memory
  • Keyboard with 5 buttons inclusive with LEDs + Reset button
  • Single power supply voltage 5V, socket for EIAJ standard power plug

 

 

Link

Link Description

pdf EUS_FS_START 1.1

Starter Board Schematic New!



Reference Designs

Link

Link Description

FPGA Registers

Provides an access into FPGA's registers

DDR Memory test

DDR Memory test based on Microblaze EDK 9.1
Blinking LED
Shows how to make LED blinking.
Keys and LEDs
Shows using of buttons to control LEDs.
VGA demo
Shows how to use VGA interface.
Registers connected to BUS interface
 		Shows how to connect registers into BUS interface.

Applications

Link

Link Description

MMC/SD card connection

Introduces how to connect MMC/SD card into EUS FS board

HOW-TOs

Link
How to compile C program
How to get into U-Boot
How to change MAC address
How to change IP address
How to load design into FPGA
How to load design into boot partition for FPGA
How to reflash linux kernel image
How to reflash root filesystem image
How to connect to the board via serial port
How to connect to the board via ethernet
How to copy files into the board via WinScp / Scp
How to install and use Board Support Package
How to compile FPGA design using XILINX ISE
How to compile FPGA design using Makefile

 

 

!!! EUS FS module and Starter board bundle = 10% discount !!!

 

Price List - EUS FS products

Module type

Processor

ETRAX FS

Processor

and FPGA

Flash

Processor

SDRAM

FPGA

Spartan3E

FPGA

DDR

Price per unit

CZK


 


(MB)

(MB)


(MB)

1-10

11-99

>100

>1000

F1

-

4

-

500-4C

16

3720

3360

2760

2400

F2

-

16

-

1200-4C

16

4200

3720

3300

2760

F3

-

32

-

1600-4C

32

5040

4560

3840

3336

C1

X

16

32

500-4C

16

6000

5400

4980

4320

C2

X

32

64

500-4C

64

6720

6000

5520

4860

C3

X

64

128

1600-4C

64

9600

8760

7800

6576

CN

X

16

32

-

-

4800

4440

3840

3360

Custom

O

2/4/8/16/

32/64

4-128

500-1600

C/I

0-128

Email or Call to DFC Design


Price List - Starter Board

Starter

Board


Price per unit
CZK



1-10

11-20

20-100

-

ST-EUSFS11

VGA DAC – 3 x 8b, 2 x RS232, USB H/D, 1x Ethernet, 2 x JTAG, 2 x GPIO

6900

6400

6000

-


 

 

 
< Prev   Next >
(c) 2006 dspfpga.com Webdesign A.G.A studio
Joomla! is Free Software released under the GNU/GPL License.